单层MXene纳米片Ti2N电磁特性的过渡金属(Sc、V、Zr)掺杂效应

二维材料MXene纳米片由于具有较大的比表面积和较高的电子迁移率而受到广泛的关注。本文采用基于密度泛函理论的第一性原理计算,对单层MXene纳米片Ti₂N电磁特性的过渡金属(Sc、V、Zr)掺杂效应进行了系统研究。结果表明,所有过渡金属掺杂体系结合能均为负值,结构均稳定;其中Ti₂N-Sc体系的形成能为-2.242 eV,结构更易形成,且保持稳定;掺杂后Ti₂N-Sc、Ti₂N-Zr体系磁矩增大;此外,Ti₂N-Sc体系中保留了较高的自旋极化率,达到84.9%,可预测该体系在自旋电子学中具有潜在的应用价值。     

The Green polynomials via vertex operators

An iterative formula for the Green polynomial is given using the vertex operator realization of the Hall-Littlewood function. Based on this, (1) a general combinatorial formula of the Green polynomial is given; (2) several compact formulas are given for Green's polynomials associated with upper partitions of length ≤3 and the diagonal lengths ≤3; (3) a Murnaghan-Nakayama type formula for the Green polynomial is obtained; and (4) an iterative formula is derived for the bitrace of the finite general linear group G and the Iwahori-Hecke algebra of type A on the permutation module of G by its Borel subgroup.     

Estimates of conjugate harmonic functions with given set of singularities and application

Analysis Mathematica - Let E be an arbitrary closed set on the unit circle ?? and u be a harmonic function on the unit disk ? satisfying |u(z)| ? (1 ?...     

Adaptive vehicle posture and height synchronization control of active air suspension systems with multiple uncertainties

This paper addresses the tasks of height and posture motion control for an electronically controlled active air suspension (AAS) system. A mathematical model of a vehicle body with AAS system is established to describe the dynamic characteristics and then formulated into a multi-input multi-output nonlinear system by considering parametric uncertainties and unmodelled dynamics. Based on this mathematical model, a synchronization control strategy is proposed to adjust the heights of adjacent AASs simultaneously, driving the pitch and roll angles closely to an arbitrarily neighborhood of zero, achieving global uniform ultimate boundedness. The proposed controller is robust to parametric uncertainties and external disturbances. A projection operator is utilized to limit the estimated parameters to their corresponding prescribed bounds in finite time. A co-simulation is conducted by combining a virtual vehicle plant with ASS system in AMEsim with the proposed synchronization controller in MATLAB/Simulink. Simulation results demonstrate that the proposed synchronization controller is effective and robust.     

Crystalline Inclusion Compounds: Thiourea and Bis-quaternary Ammonium Salts

Journal of Chemical Crystallography - Two new inclusion compounds, namely 3(CH3)3N+(CH2)3N+(CH3)3·6Br–·8(NH2)2CS·H2O (1) and...     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

二维CdO的低晶格热导率研究

寻求具有较小晶格热导率k_lat的高热电性能的二维材料具有重要意义。基于从头计算和声子玻耳兹曼输运理论,该研究首先对二维CdO结构进行优化,并通过计算声子谱验证了单层CdO的动力学稳定性。在此基础上详细研究了单层CdO的声子输运性质。计算表明在室温下单层CdO的晶格热导率k_lat约为5.7 W/(m·K),低于单层石墨烯、磷烯、黑磷和MoS₂等二维材料的晶格热导率。其中,Z方向声学模式(Z-direction acoustic, ZA),横声学支(transverse acoustic,TA),纵声学支(longitudinal acoustic, LA),Z方向光学模式(Z-direction optical, ZO),横光学支(transverse optical, TO),纵光学支(longitudinal optical, LO)对k_lat的百分比贡献分别为73.7％、13.9％、3.7％、2.8％、4.7％和1.2％。研究发现,ZA、TA、LA声学支和光学支之间的强散射是导致单层CdO低热导率的原因。本文计算结果可用于指导基于CdO的低维热电器件的设计。     

Pd nanoparticles supported on amphiphilic porous organic polymer as an efficient catalyst for aqueous hydrodechlorination and Suzuki-Miyaura coupling reactions

Developing efficient and recyclable heterogeneous catalysts for organic reactions in water is important for the sustainable development of chemical industry. In this work, Pd nanoparticles supported on DABCO-functionalized porous organic polymer was successfully prepared through an easy copolymerization and successive immobilization method. Characterization results indicated that the prepared catalyst featured big surface area, hierarchical porous structure, and excellent surface amphiphilicity. We demonstrated the use of this amphiphilic catalyst in two case reactions, i.e. the aqueous hydrodechlorination and Suzuki-Miyaura coupling reactions. Under mild reaction conditions, the catalyst showed high catalytic activities for the two reactions. In addition, the catalyst could be easily recovered and reused for several times. Also, no obvious Pd leaching and aggregation of Pd nanoparticles occurred up during the consecutive reactions.     

Aryldiazonium salts can serve as nitrogen-based Lewis acid catalysts and their applications in the formation of photoactive charge transfer complexes

We report the Lewis acid catalysis of aryldiazonium salts, and their Lewis acidity applications in photogeneration of aryl radicals under additive-, photocatalyst- and transition metal-free conditions. In this visible light-mediated transformation, the Lewis acidic character of aryldiazonium salts enables access to the photoactive charge transfer complex with dichalcogenides. The usefulness and versatility of this new protocol are demonstrated through the chalcogenation of a variety of aryldiazonium salts.     

Novel colorimetric,photothermal and up-conversion fluorescence triple-signal sensor for rosmarinic acid detection

Rosmarinic acid (RA) is promising as a natural and nontoxic food additive. However, many analysis methods for RA generally depend on large instruments and single signals for quantitative detection. A new up-conversion fluorescence, colorimetric and photothermal multi-modal sensing strategy is developed for the quantification of RA. β-cyclodextrin (CD) modified citric acid (Cit) wrapped NaYF₄:Yb/Er-Cit-CD (Y:Yb/Er-Cit-CD) up-conversion nanocomposite has been synthesized, which emits green fluorescence at 550 nm under 980 nm near-infrared (NIR) excitation. In the presence of oxidized 3,3′,5,5′-tetramethylbenzidine (oxTMB), the green fluorescence is significantly quenched attributed to the fluorescence inner filter effect (IFE) between oxTMB and Y:Yb/Er-Cit-CD. When RA is intervened, blue oxTMB is reduced to colorless 3,3′,5,5′-tetramethylbenzidine (TMB) inducing the recovery of up-conversion fluorescence. At the same time, colorimetric and photothermal signals readout can be easily achieved thanks to the color indication and photothermal effect of the oxTMB. The constructed Y:Yb/Er-Cit-CD/oxTMB sensor displays high sensitivity, visibility and simplicity for RA, and the limits of detection (LOD) for fluorescence, colorimetric and photothermal were 0.004 µmol/L, 0.036 µmol/L and 0.043 µmol/L, respectively. This sensing system is successfully performed for the detection of RA in food samples.